Received IR-Ribbon and band pass filter

I received the IR-LED Ribbon from Environmentallights and the band pass filter from Peau Productions last Friday and this Monday I started working on a new table. I decided to reduce the size of the Endlighten and splitted the sheet into two. So now the Endlighten in the table is 850×550mm which is more of an 16:9 aspect ratio.

I made a new frame with aluminum L-profiles and created the various parts for the table in MDF. After that I did a quick test to see if I could get better blobs this time and YES(!) there was a huge difference. I used Mylyn paper as the projection screen and it worked out quite well. Will be interesting to see the results with a 7D006 Rear Projection sheet from Röhm Evonik.

After the test with some different MT applications i continued with the cabinet for the table. The dimensions of the cabinet is 1000×960mmx700 (LxHxD). Next up is to order a new short throw projector, a back projection acrylic and a mirror for reflecting the projected image. I will continue working on the table adding a door, painting the table black matte and start designing the fixtures for the mirror, the camera and the projector.
The picture below shows the current status of the table.